| 吸塑加热器 |
| 添加时间：2020/8/20 14:12:06 浏览次数： |
| 吸塑加热器：吸塑加热器主要由弧形热盒、8支远红外管、支承轴和定位器等组成，弧形热盒上端铰装在支承轴上，并可绕轴摆动，工作时靠近吸塑滚模幅射加热料薄膜，不工作时摆离吸塑滚模。远红外管安装在热盒内，为本机构的发热元件，通过电子调压器调节远红外管两极电压来调节发热量，使薄膜获得必要的软化温度，支承轴固定在机身上，用以支承热盒，定位器由弹簧拉杆和挡块组成，分别安装在热盒和机身上，为热盒工作位置定位之用。 Blister heater: the blister heater is mainly composed of arc-shaped hot box, 8 far-infrared tubes, supporting shaft and positioner. The upper end of the arc-shaped heat box is hinged on the supporting shaft and can swing around the shaft. When working, it is close to the blister roll mold to radiate the heating material film, and swing away from the blister roll mold when it is not working. The far-infrared tube is installed in the hot box, which is the heating element of the mechanism. The electric voltage regulator is used to adjust the two pole voltage of the far-infrared tube to adjust the heat value, so that the film can obtain the necessary softening temperature. The supporting shaft is fixed on the body to support the hot box. The positioner is composed of a spring rod and a stop block, which are respectively installed on the hot box and the machine body for positioning the working position of the hot box. |
| 上一页 电动伸缩门详细解说 |
| 下一页 食品铝塑袋特点 |
Copyright © 技术支持：遨游网络